Flat · Pineville, NC
Aluminum flat bar, cut to size
Solid rectangular bar by width and thickness, cut to your lengths.
Pick a tag, type your lengths, and the total is on the screen before you pay. Pickup at the counter is free.
Flat on the rack
3 tags of flat on the rack
Drawing, not a photograph
Tag No. 1118
3 in flat bar
6061-T6 · 3 in x 3/8 in · 3/8 in wall
$4.10 per foot
20 ft on the rack
Ready now
Drawing, not a photograph
Tag No. 1117
2 in flat bar
6061-T6 · 2 in x 1/4 in · 1/4 in wall
$1.85 per foot
20 ft on the rack
Ready now
Drawing, not a photograph
Tag No. 1116
1 1/2 in flat bar
6063-T5 · 1 1/2 in x 1/8 in · 1/8 in wall
$0.70 per foot
20 ft on the rack
Ready now
What flat bar is, and how it is measured
Flat bar is solid, written as width by thickness: 2 in x 1/4 in.
Thicker than about 1/4 in and wider than about 6 in, the trade calls it plate.
What people cut it for
Straps, backing plates, spacers, gussets, base plates and anything that gets drilled and bolted.
6061-T6 is the usual ask, because flat bar almost always carries something.
Not on a tag? Ask the counter.
Tell us the width, the thickness and your lengths.
Worth reading first
Cut to ±1/8 in. Cut fee $15.00 covers one to four cuts. Order minimum $50.00; bin pieces have none.
Visit the counter
10108 Industrial Dr, Pineville, NC 28134
Around the side of Ornamental Post & Panel. Ask for it by tag number at the counter.
- Hours
- M–F, 8a–5p ET
- Phone
- 704-376-8111
- Pickup
- Free, at the counter
- Since
- Pineville, 2005