Angle · Pineville, NC
Aluminum angle, cut to size
Two legs at ninety degrees, priced by the foot and cut while you wait.
Pick a tag, type your lengths, and the total is on the screen before you pay. Pickup at the counter is free.
Angle on the rack
3 tags of angle on the rack
Drawing, not a photograph
Tag No. 1112
2 in heavy angle
6061-T6 · 2 in x 2 in · 1/4 in wall
$3.25 per foot
20 ft on the rack
Ready now
Drawing, not a photograph
Tag No. 1111
2 in aluminum angle
6061-T6 · 2 in x 2 in · 1/8 in wall
$1.70 per foot
20 ft on the rack
Ready now
Drawing, not a photograph
Tag No. 1110
1 1/2 in aluminum angle
6063-T5 · 1 1/2 in x 1 1/2 in · 1/8 in wall
$1.25 per foot
20 ft on the rack
Ready now
What angle is, and how it is measured
Angle is written as leg by leg by thickness: 2 in x 2 in x 1/8 in.
Equal-leg angle is the common one. Unequal legs turn up in the shop profiles.
What people cut it for
The cheapest way to stiffen an edge or make a corner. Brackets, frames, shelf edges, ledgers.
It drills and welds easily, which is why most fabrication starts with a stick of it.
Not on a tag? Ask the counter.
Tell us both legs, the thickness and your lengths.
Worth reading first
Cut to ±1/8 in. Cut fee $15.00 covers one to four cuts. Order minimum $50.00; bin pieces have none.
Visit the counter
10108 Industrial Dr, Pineville, NC 28134
Around the side of Ornamental Post & Panel. Ask for it by tag number at the counter.
- Hours
- M–F, 8a–5p ET
- Phone
- 704-376-8111
- Pickup
- Free, at the counter
- Since
- Pineville, 2005